Product Description

Resene Sidewalk is based on tough, flexible polyurethane resins to give maximum abrasion resistance in a one-pack finish. The surface finish of sidewalk is designed to reduce the hazard of slipping. Add Resene SRG Grit for extra slip resistance.

Technical and Environmental Benefits

Resene Waterbourne Sidewalk has been certified by Environmental Choice NZ as well as independently reviewed by EnviroSpec for its points contribution potential in Green Star NZ and Homestar building rating systems. Unwanted paint and paint containers can be returned to the Resene PaintWise paint and paint packaging recovery programme. Returns are donated to community groups, sent to solvent recovery, packaging is recycled and other paint goes into covering graffiti and research on alternative uses. Additional benefits include:

• Excellent adhesion to new and repaint work.
• Satin finish tends to minimise the appearance of substrate defects
• Excellent colour retention

Manufacturer and Supplier Information - Resene Paints Ltd

Resene started its quest towards more sustainable practices in the 1950s when it introduced waterborne paint. In 1996 Resene became the first New Zealand paint company to offer an extensive range of Environmental Choice approved products, Resene has since continued innovating in this space. In 2007 Resene Zylone Sheen VOC Free was introduced, and more recently Non VOC tinters have been introduced. The Cool Colours range provides exterior paints formulated to reflect solar radiation that would normally be absorbed. This is claimed to reduce substrate stress, improve paint longevity, and can help reduce heat absorption through building fabric which in turn could mean less air conditioning requirements. Resene also operates the PaintWise recycling programme, which includes a world-first" mobile paint collection and recovery

Application and Purpose

Typical uses: Composite board, concrete, decking, domestic - garage & light, industrial floors, fibre cement, particleboard, steps and timber.

Application:
Apply by brush, roller or spray (standard product only).

Limitations:
1. Not designed for use in severe environments, such as chemical plant or steel-wheeled traffic areas.
2. Check concrete floors for presence of moisture. Paint may peel and blister from surface if excess moisture is present in floor slabs.
3. Requires 48 hours to develop maximum resistance.

Installation and Maintenance

Resene products are guaranteed to provide film integrity and adhesion for the expected life of the paint system. Maintenance: Avoid cleaning the paint finish until at least four weeks after application time to ensure it has had sufficient time to fully develop its properties. Keep any cleaning to a minimum to avoid damaging the paint film. Follow the care and cleaning instructions in the Resene Caring for your paint finish brochure.